Wiper motor cleaned up

I resprayed the motor outer case after removing all the rust. Removed all the old greas out of the workings and put new stuff in as it was full off grit and dirt. Just a new part switch to fit and it's good to go back in.

wiper motet striped out.

Air intake

Ad you can see I just wire brushe the intake downe and resprayed it. I also put some new sponge on the paddle.

Air filter intake clean up.

Clock cleaned

All cleaned up and back together. Just pop the front shade back on and all dun.

Water and fuel gage clock

Speedo out with 2 screws.

Clock lens pop off

As you can see just 8 or so clips hold the plastic lens on to the main body of the clock. Needs a good wash dirt is well stuck on.

Circuit off ready for a little clean

A little mucky but nothing that can't be fixed

Circuit sheet off clocks

Don't really no what it calls but I call it a circuit sheet. Not to nard to get off. Pop app the light clips out and ease it off the pegs toy can see hooding it on. Also the 6 screws that hold the fuel and temp gage in place.

Clock unit

Can't really see but the glass is right mucky.

Clock clean front cover

Not had lot of time to upload

Ok looks like I'm a bit behind with what iv been doing on the mini bit it's all been in the past 4/5 weeks so will try and get the photos up and little notes to go with. Not always easy from my phone by email, limit to 3 photos and no text

Speedo clean up

Wiper motor rust

But of rust. Will give it a clean later.

Wiper motor